Heatmiser neoAir V3 Smart Thermostat & RF Switch
Upgrade your home’s heating and hot water control with the Heatmiser neoAir V3 Smart Thermostat & RF Switch. This advanced system allows you to wirelessly manage your home’s temperature from anywhere when paired with the Heatmiser Neohub.
Heatmiser neoAir V3 Smart Thermostat
The Heatmiser neoAir V3 is a battery-powered, wireless thermostat that integrates seamlessly with the Heatmiser RF Switch and UH8-RF Wireless Receivers. It offers versatile control options, functioning as a:
- Standalone Thermostat
- Timer
- Thermostat & Timer Combination
Key Features
- Self-Learning Preheat: Automatically calculates the optimal heat-up time, ensuring your home is warm and comfortable when needed while optimising energy efficiency.
- Advanced Wireless Mesh Networking: Communicates wirelessly with the neoHub and extends range through mains-powered neoStat devices.
- Intuitive Backlit Display: Easy-to-read backlit screen for convenient control, even in low-light conditions.
- Battery-Powered: Operates on 4 x AAA batteries, allowing flexible thermostat placement.
- Customisable Scheduling: Choose from 5/2-day, 7-day, or 24-hour programming to match your routine.
- Additional Features: Holiday mode, temperature hold, air sensor connection, floor sensing mode (probe required), frost protection, Celsius/Fahrenheit display, and four comfort levels per day.
Heatmiser RF Switch – Wireless Heating & Hot Water Control
The Heatmiser RF Switch is a surface-mounted, 2-channel wireless receiver designed for controlling two heating zones and one hot water zone.
Key Features
- Seamless Integration: Works wirelessly with the neoAir V3 and UH8-RF, ensuring smooth operation.
- Volt-Free Output: Ensures a safe and reliable connection to your heating system.
- Reliable Surface Mounting: Compact and easy to install for efficient heating control.
Specifications
Heatmiser neoAir V3
| Feature | Details |
|---|---|
| Supply | 4 x AAA Batteries |
| Dimensions (L x H x D) | 86 x 86 x 26mm |
| Temperature Range | 5 – 35°C |
| Heating Levels | 4 |
| Max Current | 3A |
| IP Rating | IP20 |
Heatmiser RF Switch
| Feature | Details |
|---|---|
| Compatibility | Slimline-RF, Touch-RF, neoAir, UH8-RF |
| Heating Zones | 2 |
| Hot Water Zones | 1 |
| Boiler Output | 1 |
| Mounting Type | Surface |
| Relay Load Max | 3A Resistive |
| Total Load Max | 9A Resistive |
| Supply | 230V AC |
| Dimensions (L x H x D) | 108 x 90 x 24mm |
Installation Guide
Heatmiser neoAir V3
- Separate the front half of the thermostat from the back plate using a small flat-head screwdriver.
- Mark two holes on the wall using the back plate as a template.
- Drill holes and insert wall plugs.
- Attach the back plate to the wall with screws.
- Clip the front panel back onto the back plate.
Important: Do not install near a direct heat source, and avoid pressing hard on the LCD screen.
Heatmiser RF Switch
- Loosen the screw at the base of the RF-Switch and remove the front panel.
- Position the back plate on the wall and secure it using the provided screws.
- Terminate the cables according to the wiring diagram.
- Reattach the front panel to the back plate and tighten the retaining screw.
- Switch on the power supply – the power LED will illuminate.
Why Choose the Heatmiser neoAir V3 & RF Switch?
- Smart, Wireless Heating Control: Manage your home’s temperature remotely via the Neohub.
- Energy Efficient & Cost-Effective: Optimised heating schedules save energy and reduce costs.
- User-Friendly & Flexible: Easy setup with multiple programming options.
- Seamless Integration: Works with Heatmiser smart home systems and compatible devices.
- Reliable & Secure: Advanced mesh networking ensures stable connectivity.
Need Assistance?
Check the included user manual for detailed setup instructions or contact our support team for expert guidance.
