Apart ZONE4 4-Zone Stereo Pre-Amplifier Mixer

DETAILS

The Apart ZONE4 is a 4-Zone Stereo Pre-Amplifier Mixer with 4 digitally controlled outputs perfect for multi-zone audio systems. 

The sophisticated pre-amplifier ZONE4 allows you to control four stereo zones with just one affordable unit. In any of the 4 zones you can play music that comes from one of the 4 music sources you can connect. There is also the possibility to assign 3 microphones to each zone where MIC1 can be a dynamic priority mic (via contact closure) or a 4-zone selective paging microphone (MICPAT-4). Each signal is assignable to any of the four output zones through dipswitches on the front and the back of the unit. Phantom power supply on MIC 1 & 2 can be activated via a dip switch.

The ZONE4 can be controlled from the front panel (with digital display), via the RS232-connector or via the IR serial. On top of that you can control the unit via the ZONE4R remote control panels. Thes control panels have a clear LED status display and buttons for music level, MIC/MIX level, source select and mute controls. Because the remote is wired with a normal CAT5 cable, it is very easy to install.

On the output side, there is a line input selector and music level control per zone. A clear digital display makes it easier to monitor the functioning of the unit. Further, there are independent MIC-MIX level control and bass-treble control per zone.

The unit is 19” format and comes standard with removable brackets. The removable metal cover (included) protects your MIC-settings.

Apart ZONE4 Key Features:

• Pre-amplifier allows control of four stereo zones with one unit
• Play any one of four sources in any of the four available zones
• MIC-MIX level control and bass-treble control per zone
• Assign up to 3 microphones to each zone via dipswitches
• Phantom power supply on MIC 1 & 2
• The remote is wired with a normal CAT5 cable

View the Apart range of products HERE

See SPECIFICATION tab for technical specs

SPECS & DOWNLOADS

Apart ZONE4 Specifications

General

• 19″ (483 mm wide) rack mounting: yes
• Power supply: 115 – 230 VAC
• Power consumption (max): 25 watts
• Zone outputs: 4 stereo
• Output level balanced (dB): 0
• Output level unbalanced (dB): 0
• S/PDIF output: no
• Signal to noise level SNR (dB): >90
• Total harmonic distortion TBH (%): <0.02
• Crosstalk (dB): >75
• Music level control: yes
• MIC level control: yes
• VCA level control: no
• Source selection per zone: yes
• MIC inputs balanced: 3
• MIC inputs unbalanced: 0
• Inputs with Phantom power: 2
• Phantom power voltage: 18 volts
• Noise gate on MIC: no
• Selectable input dynamics: no
• Selectable output dynamics: no
• Line input balanced: 0
• Line input unbalanced: 4 stereo
• S/PDIF input: no
• Tone control: yes
• RS232 (serial communication port): yes
• Wall panel controls: yes
• Priority input contact: yes
• Maximum qty paging Mics: 4
• Chime: no
• Emergency input: yes
• Priority output contact: no
• Priority levels: 2
• Frequency response (in Hz): 20 – 30 k
• Applicable in 100V: yes
• Applicable low impedance: yes

Physical & Dimensions

• Weight: 2.75kg
• Height- rack units: 1U
• Depth (build in): 196mm
• Depth (incl front): 205mm

Apart ZONE4 PDF Downloads

Download the User Manual Here